Letter to Commissioner General-URA

Letter to Commissioner General (CG) URA

Tax collection measures gone wild:

Spending 1 million Shs to recover 1 Shs!

 

Dear Madam CG,

I do acknowledge that in a bid to enforce compliance and recover government taxes, Uganda Revenue Authority through various tax laws has powers to impose certain measures with a view of collecting unpaid tax.

From a Customs point of view for example, Section 130(2) of the East African Customs Management Act (EACCMA) provides for recovery of duty by distress as follows;

 130(2) Goods under Customs control which belong to any person from whom duty is due, and any goods afterwards imported or entered for export by that person, shall be subject to a lien for such debt and may be detained by the Partner State until such duty is paid and the claim of  the  relevant  Partner  State  shall  have  priority  over  the  claims  of whatever nature of any other person upon the goods and the goods may be sold to meet the duty due if the duty is not paid within two months after the goods are detained. 

 Under the Income Tax Act CAP 340 of the Laws of Uganda, Section 106 provides for recovery of Tax from Person owing Money to the Taxpayer as follows;

(1) Where a taxpayer fails to pay income tax on the date on which it becomes due and payable, and the tax payable is not the subject of a dispute, the Commissioner may, by notice in writing, require any person

(a) owing or who may owe money to the taxpayer;

(b) holding or who may subsequently hold money for, or on account of, the taxpayer;

(c) holding or who may subsequently hold money on account of some other person for payment to the taxpayer; or

(d) having authority from some other person to pay money to the taxpayer,

to pay the money to the Commissioner on the date set out in the notice, up to the amount of tax due.

The above enforcement measure is also provided under Section 40 of the VAT Act which provides for Recovery of Tax from third parties.

 Spending 1 million to recover 1 Shilling

Madam CG, having been in the tax practice for more than a decade, I fully recognize that any tax or duty when it becomes due and payable, is a debt to the Government of Uganda and is payable to the Commissioner in the manner and at the place prescribed. I also recognize that as mentioned above,you do have powers to enforce collection using different measures as provided for under the various tax laws and regulations of the land.

 

However, what caught my attention in January 2016 is whenyou invoked Section 130(2) of EACCMA to collect an outstanding duty of Ushs 1 Shilling. I repeat, ONE Uganda Shilling! But in the process of recovering that one shilling owed to Customs, I noted that youcould have actually lost 1 million shillings in domestic taxes. But how did this happen?

 In January 2016, an importer tried to clear his consignment which had arrived at Malababorder post. When his clearing agent tried to declare the consignment to customs, he received an auto response on ASYCUDAWORLD that “Company is suspended”. Not knowing the cause of suspension, the clearing agent called the importer and delivered the sad news. The importer not knowing what was wrong dropped an email to his tax agent in Kampala. A consignment worth millions of Shillings is stuck at the border post. Malaba customs officers unfortunately have no answer. At this point, not only the Importer is losing market BUT he has started incurring “delay” charges too.

 Back in Kampala, his tax agent rushes to URA at Crested Towers to find out why the company/importer has been suspended. Unfortunately Crested Towers refers the tax agent to Nakawa ASYCUDA offices for answers. Almost beaten at his own game, the tax agent notifies the importer to be more patient as the issue is sorted out. At ASYCUDA offices, the URA officer gently taps on his desktop and BEHOLD, the company has been suspended due to an outstanding duty of Ushs 1 Shilling (One Shilling) relating to an earlier entry of April 2014.Blood of Jesus, on cross checking the entry, we noted that the importer had paid Ushs 731,500 instead of Ushs 731,501. Why was the issue not raised before the consignment was released in 2014?  But the tax agent realized this wasn’t the time for asking questions. The officer confidently told the tax agent to arrange and pay One shilling to a designated bank before the consignment can be released. Indeed, the accountant wrote a chequeof Ushs 1 shilling and looked for the signatory for signature. Finally, after all the ups and downs, the amount was paid to Diamond Trust Bank on 23 January 2016. On that same day, the consignment worth millions of shillings was finally released.

 How then did URA lose the 1million?

Madam CG, throughout the entire process of recovering the One shilling, what URA forgot was that the importer/taxpayer was incurring heavy expenses which are tax deductible. By running up and down trying to look for answers, the tax agent had to bill the importer consultancy fees. On the other hand, the more days the truck delayed at Malaba, the more delay charges the importer paid to the transporter.  Below are some of the expenses incurred by the importer in resolving the issue of One shilling;

Nature of expense

Amount ‘Ushs

Tax Consultancy services

1,000,000

Truck delay charges at Malaba (USD 150 per day X 4 days)

2,040,000

Extra Drivers allowances

    500,000

TOTAL

3,540,000

 The Ushs 3,540,000 above will be reflected in the taxpayer’s income tax return as an allowable deduction. This means it will reduce the taxpayers profit by Ushs 3,540,000. At this point, the domestic taxes department has directly lost 30% income tax on the above figure which is Ushs1,062,000. I know another school of thought will argue that the Ushs 3,540,000 will be reflected in another person’s return as income but knowing the Uganda we live in, we wouldn’t want to go that route.

 The above implies that if URA followed up 100 such cases, they will recover Ushs 100 in customs duties and lose Ushs 106,200,000 in income tax. Great effort. Well done. Every penny collected.  Meanwhile, from the banking point of view, people are lining up to pay 1 Shilling plus Ushs 2,500 bank charges. Some banks also don’t accept cash and therefore some taxpayers are writing cheques of 1 shilling payable to URA. The same cheque will go through the normal banking procedures and someone is still not seeing the inconveniences of trying to recover 1 shilling.

 My humble proposals

Once again I reiterate my earlier position that any tax or duty when it becomes due and payable, is a debt to the Government of Uganda. However, in my opinion it does not make any economic sense for URA to run after taxpayers who have not paid 1shilling while a “LIST OF SHAME” for taxpayers with tax arrears of billions of Shillings is displayed on URA’s website and nothing has been done to recover the taxes. The last time I checked, the taxpayers were persons that are well known and URA has not done much to unleash their enforcement measures. If any serious measures were unleashed on these “list of shame” persons, then we wouldn’t see the same names appearing year in year out.

 Madam CG, in light of the above, I wish to make only 2 humble suggestions as follows;

1.      That URA puts a threshold below which enforcement measures should not be instituted; or,

2.      For importers, the 1 Shilling in duty arrears can be added on the new consignment rather than putting a lien on it. I am sure no sane importer would argue or even recognize an additional duty of 1 shilling being added on a fresh consignment.

While URA is doing everything possible to recover every single penny, this must be done without causing unnecessary inconveniences to taxpayers, transporters, banks and URA collectors themselves. Madam CG, while I may have so many other issues of concern regarding processes at URA, it is my humble hope and prayer that you look into this one issue as we “develop Uganda together”.

 By Albert Beine

Tax Director – PKF Uganda

 

 

 

 

 

Random news

Managing Successful SMEs

MANAGING SUCCESSFUL SMALL AND MEDIUM ENTERPRISES (SMEs)

Background:
Like David Richards says, it is not an easy time to be a “small or medium sized enterprise (SME)” owner since the cost of living is high, people are spending cautiously and investors are becoming increasingly conservative. Being an entrepreneur requires worrying about cash flow management among other things to compete effectively.
SME is a business segment term used differently in different countries, sometimes differently in different industries in the same country. In the US, any firm from a small-office home - office (SOHO) to a large corporation may be called a SME.
The European definition of SME follows: "The category of micro, small and medium-sized enterprises (SMEs) is made up of enterprises which employ fewer than 250 persons and which have an annual turnover not exceeding 50 million euro, and/or an annual balance sheet total not exceeding 43 million euro."
In 2008, the Uganda Investment Authority (UIA) introduced the first Small and Medium Enterprises Business Guide. This guide provides information and contacts on business licensing, access to finance, entrepreneurship skills training, business development services, and taxation/incentives.

Challenges of running SMEs
Sometimes in most employees life one gets frustrated at the hustle and bustle and mind-numbing regularity of paid employment. You just want to take initiatives and responsibilities that would bring about a successful enterprise – “your enterprise”. The dream is to be your own boss. But then, it’s one thing to dream, and another to see such dreams materialize to reality.
One of the biggest challenges is the fear of failing. It’s important to appreciate the regularity of salaries/wages and consider scenarios if “your enterprise” doesn’t make it quick or in the intended direction.
Truth be told, being a business owner comes with challenges unique to the size and function of the business. The small business owner, for example, has to handle all the challenges of selling, delivering, financing, managing and growing the business with little or no staff, while trying to make it a success at the same time. This can often prove to be intimidating but not altogether unachievable. No one ever said it would be easy running a successful small business. But then, when you get it right, the rewards can be hugely amazing and remarkable. It should interest you to know that most big, successful and legendary businesses today started off as small businesses.
It is important to retain the interest of all stakeholders like customers, partners, vendors, your best staff and team to build momentum in a short span of time. This takes vision. It also takes courage and belief – belief in your ability to steer your ship to success.
Here are some of the secrets to run a small business that can make these challenges easier to handle and make a successful business venture.
Secrets for SME Success
Secret1: Have a clear vision of what you intend to do and the business you wish to run.
 
Vision is a key hallmark of success principles in business and other aspect of life. Vision gives you a vivid picture of what you want to accomplish. It makes you see the end from the beginning. This picture will illuminate and motivate your mind throughout the course of your business journey. By having a clear vision for your business, the mission takes shape and business objectives and goals emerge.
Secret2: Define clearly what you sell and also to whom you sell or render service
Defining what your business does from the word GO, as you set out into the business world, is always one of (if not) the most important step to running a successful business. This makes it a whole lot easier to manage your company going forward. In addition, this enables you to explain your business clearly, without ambiguity, to investors or partners when the need arises.
Secret3: Source for funds security and sustainability
 
Running a small business requires financial backbone, prudence and efficiency. Explore all available financial options open to you, such as family, friends, business associates, investors, banks, etc. However, the choice of the right financial option for your business' financial plan and support is vital. Also, bank with the right financial institution that will give you the best deals, helps you stretch every shilling and provide for financial prudence in management of the business.
Secret 4: Get business information and technical guidance/advice from Small Business Development Consultant(s)
Today, a number of businesses and professionals give expert business advice and services at a token fee for individuals and groups wanting to go into new businesses or diversify their existing businesses into new areas or line of products and/or services. These professionals provide help and sound business support and solutions services during all stages of the business life cycle.
These include legal advice and consultation, business development and strategies, recruitment and management of staff from business psychologists, and so on. Their business support and development services help business to mature by making the right business calls that won’t only serve in the immediate and short term, but would strategically assist in positioning the business for long term success.
Secret 5: Create a workable business and marketing plan for your SME
 
One of the keys to running a small business enterprise is having a detailed and workable business plan that outlines the objectives, goals, target market and projected growth. In addition to having a concrete business plan, ensure that you work out a detailed business marketing plan to go with it. Without this, it’s necessary to rethink why you are in business in the first place.
Secret 6: Go ahead and start a business
Once you have established the vision and mission of the company, defined clearly what type of products and services your business wants to offer, contacted your financial sources for funding and secured your business funds, consulted business professionals for necessary legal and business strategy building aspects such as registration, documentation, business structure processes building, then finally built a creative and detailed business and business marketing plan, to drive and carry the business, it is now the time to start! Don’t waste another moment idling and wishing. Just start!
Secret 7: Build a strong brand identity that will stand the test of time
Actually, branding the business should start the very moment you articulate and conceptualize the business idea. This involves creatively building a business identity that would appeal to the target market in a continuous manner. It includes but is not limited to the choice of business name, type of business engaged in; and the personality you want the business to have. Be very creative and innovative with graphic designs, business colours, taglines, business logos and other communications. Everything must be organized and attractive to the targeted customer to bring about more sales and continued business patronage.
Secret 8: Prioritize on making profit
It’s amazing how many times people start up business enterprises and then forget how to make profit. It is a known rule in economics that the chief aim in business is to make profit. When that is no longer the case, it becomes difficult to sustain or grow business. Therefore, the moment a business is set out to be successful, it’s important to understand the golden rule of money - “make sure more comes in than goes out”. Once this is achieved, there will be enough to re-invest in the business and to make you feel it is all worth it going into business.
In addition, prioritizing profit making also involves optimising cost management to minimise waste, maximise productivity and profitability. Where you can’t seem to get it right yourself, hire or consult an accounting professional to help you keep your books in order, manage your finances properly and professionally to ensure your business remains profitable!
Secret 9: Network and connect with other businesses and business minded individuals as much as possible
To grow business for a wider reach and approachability, ensure you network with other local small businesses and small business owners on overall business vision, shared business strategies and opportunities. Attend regular business events; they present great opportunities and avenues for small businesses to come together, rub minds, share business ideas and experiences. Also, join small business associations and participate in local events to raise awareness, promote your business and its brand.
Secret 10: Never leave a single customer dissatisfied
 
It may be very difficult to keep every one of your customers happy. That is a business fact. But you must try to keep every one of your customers satisfied. That should be your business reality. Having a pro-customer orientation – whether you run a small business alone or have employees working for you – is as vital a decision as the decision to go into running a business in the first place. There can be no business without customers. The more customers patronize your business, the more the chances of making a profit, and actually building something successful and wonderful. Therefore, businesses must emphasise customer satisfaction through effective customer service and relation. Make use of positive and negative feedback from customers to improve the quality and desirability of your products and/or services.
Secret 11: Be Passionate about your business and commit to continuous improvement
Never settle for less. Always go for more. Renounce average. Beware of comfort. Avoid complacency. Live by belief. Every day you should desire your business to be in a better position than it was yesterday. This mindset should permeate through you to your staff. Even when hiring, ensure focus on those who can do more, bring more, create more, live more, give more, sacrifice more, believe more, support more, relate more and accomplish more. Emphasis should be on more, more and more - constant improvement, no room for stagnation and redundancy. Remember, most of the iconic businesses you see today like Coca Cola, Apple, etc. didn’t start big. In fact, most of the Fortune 500 companies started small. But they made it to the top because they keep going and keep improving and wanting to be better. They still do today, and some of them are over a century old. You too can do it, if you try and believe you can!
Secret 12: Feel the winds of change in the air
To be a successful business, you need to be able to change and adapt your products and services as situations dictate. What was successful last year may not work for you this year.
Be ready to try new ideas, expand your business and bring in new people. In order to fuel such radical changes, you may well need to consider exploring new avenues of funding in order to enable your growth. A measured risk often pays off in business growth.
Secret 13: Taste the exotic fruit of unexplored markets
If you are looking to grow and expand your business, you may not find enough clients with money to spare in the existing markets.
This could be the year in which you reach out to new markets, bringing in eager new clients and taking your goods and services into territories you’d never considered before. Consider expanding geographically as well as into new niche areas of business.
Remember, running a successful small business may be tasking and at times just plain frustrating, but the eventual rewards of running a business successfully are too numerous to mention. The benefits you reap ultimately will be boundless. And the financial rewards? Well, you may just turn out to be the next Aliko Dangote or Bill Gates!

BUSINESS PROCESS IMPROVEMENT: EMPHASIS ON CYCLE TIME

BUSINESS PROCESS IMPROVEMENT: EMPHASIS ON CYCLE TIME:

Cycle time refers to the period required to complete one cycle of an operation; or to complete a function, job, or task from start to finish. Cycle time is used in differentiating total duration of a process from its run time.

It is the average time between successive deliveries. In other words:
Cycle Time = Operating Hours per day / Quantity per day
For example, assume that the plant operates for 10 hours per day and need to produce 60 computers each day. The Cycle Time is 10 / 60 = 1/6th of an hour,which is 10 minutes. In other words, on average every 10 minutes a computer rolls off the assembly line.
“Quantity per day” is the same as Throughput for a day, in the example 60 computers per day.
As the old saying goes that time is money, critical business processes are subject to the rule of thumb that time is money. Such processes are usually carried out through resources that often result as bottlenecks. Unfortunately, the products derived from these processes are usually the ones that matter most to customers; therefore, the products need to be delivered as fast as possible. This cuts across both to the internal and external clients, manufacturing and service industries.



    Competitive Advantage:Business and service delivery has changed over recent years, and competitors threaten in almost every market. Reducing product cycle times increases the potential to develop and deliver innovative products and be first to market with them. This is especially true if you compete against multiple providers that offer similar products or close substitutes. Every day you reduce your cycle time is a day you gain in meeting or beating competitor product launch dates.
If company A cannot supply the desired product at the desired time, a competitor will.Inthisnew environment, cycle time reduction provides a key competitive advantage.

    Customer satisfaction: Reduced cycle time can translate into increased customer satisfaction. Quick response companies can launch new products earlier, penetrate
New markets faster, meet changing demand, and can deliver rapidly and on time. They can also offer their customers lower costs because quick response companies have streamlined processes with low inventory and less obsolete stock. According to empirical studies, halving the cycle time (and doubling the work-in-process inventory tums can increase productivity20% to 70%. Moreover, quartering the time for one step typically reduces costs by 20.05%.

    Improves quality: With reduced cycle times, quality improves too. Faster processes allow lower inventories which, in turn, expose weaknesses and increase the rate of improvement. After eliminating non-value added transactions (as opposed to value added transformations), there are fewer opportunities for defects. Fast cycle time organizations experience more rapid feedback throughout the supply chain as downstream customers receive goods closer and closer to the time they were manufactured.

    Cost savings: Cycle time reduction saves costs.

Typically, optimizing efficiency in production processes helps you cut down on cycle time, which saves you money. This often results from thorough analysis of every step of the development and production process, refinement of inefficient steps and removal of steps unnecessary to the process. Each hour or day cut from the product cycle time saves money spent on labor, equipment and utilities used in production.
For example, if manufacturing cannot respond quickly and if a high service level isdesired, then the organization must either keep high inventory or lengthen the promisedlead time. Also consider a service industry: Suppose the central store spends less time on internal clients, they will save on deterioration, pilferage and insurance if some of the inventory is insured. 

    Distribution Channel Benefits
Within a traditional distribution channel, manufacturers produce and then sell products to distributors or retailers, which eventually sell goods to consumers. Maintaining close relationships in your distribution channel is important to manufacturers, and reducing product cycle times helps you meet the needs and requirements of distribution channel partners. This strengthens your position and makes you more attractive for other resellers looking for efficient producers.
Cycle time reduction results in simplified processes with fewer steps. In most cases, a process that has fewer steps will yield fewer mistakes. Simpler processes produce fewer errors.

Common methods to reduce cycle time
There are several efforts suitable for reducing cycle times. Streamlining multiple efforts, however, can yield a much more efficient process resulting in cost and time savings and customer satisfaction. When reducing process cycle time, consider a combination of the following ideas.
Perform activities in parallel. Most of the steps in a business process are often performed in sequence. A serial approach results in the cycle time for the entire process being the sum of the individual steps, not to mention transport and waiting time between steps. When using a parallel approach, the cycle time can be reduced by as much as 80% and produces a better result.
A classic example is product development, where the current trend is toward concurrent engineering. Instead of forming a concept, making drawings, creating a bill of materials, and mapping processes, all activities take place in parallel by integrated teams. In doing so, the development time is reduced dramatically, and the needs of all those involved are addressed during the development process.
Change the sequence of activities. Documents and products are often transported back and forth between machines, departments, buildings, and so forth. For instance, a document might be transferred between two offices a number of times for inspection and signing. If the sequence of some of these activities can be altered, it may be possible to perform much of the document's processing when it comes to a building the first time.
Reduce interruptions. Any issue that causes long delays and increases the cycle time for a critical business process is an interruption. The production of an important order can, for example, be stopped by an order from a far less valuable customer request--one that must be rushed because it has been delayed. Similarly, anyone working amidst a critical business process can be interrupted by a phone call that could have been handled by someone else. The main principle is that everything should be done to allow uninterrupted operation of the critical business processes and let others handle interruptions.
Improve timing. Many processes are performed with relatively large time intervals between each activity. For example, a purchasing order may only be issued every other day. Individuals using such reports should be aware of deadlines to avoid missing them, as improved timing in these processes can save many days of cycle time.
A case study in streamlining
Consider an electronics manufacturer receiving customer complaints about long order processing times--a cycle time of 29 days. An assessment of the order processing system revealed 12 instances where managers had to approve employees' work.
It was determined that the first 10 approval instances did not yield detailed reviews because managers felt the activity was an interruption when there were other activities that needed to be addressed. Those initiating the orders, therefore, were given authority to approve their own work. This saved an average of seven to eight days in the order processing activity.
Many subsystems had interfered with the process--each performing the same or similar tasks. The logical step was to perform redundancy elimination, and a detailed flowchart of the process was created. At closer inspection, 16 steps proved very similar to one another. By changing the sequence of activities and creating one companywide order document, 13 of these steps were removed.
Over a period of four months, the order system was totally redesigned to allow information to be entered once and become available to the entire organization. Due to this adjustment, activities could be handled in a parallel manner. After a value-added analysis, the manufacturer was able to reduce cycle time from 29 days to 9 days, save cost and employee time per standard order, and increase customer satisfaction.
The good news is that almost every company is a good candidate for cycle time reduction.

CPA SSEMPIJJA WILBERFORCE

Why you can’t assess auditing software just the same way as accounting software.

Why you can’t assess auditing software just the same way as accounting software.

As a representative of a popular audit software product, I often get asked by audit practitioners whether I could avail them with a demo copy of the software so that we can ‘play around with it’.

Since financial audit and accounting are related, how different can the respective software be? The self-check procedures accountants use to decide whether an accounting system is working are quite simple and straightforward in their design: You put in a piece of data at one end and check to see if the information that has been crunched through the system and that comes out at the other end meets your expectations. A simple example of such a procedure would be taking a pocket calculator and adding up the column of numbers your assistant gave you to see if it agrees with the total at the bottom of his schedule.

However procedures like these only tell you whether the accounting softwareis able to properly process information that has been fed into it according to the rules that you specify. It’s the sort of procedure where because you know in advance, what the results should be, you can test it quite easily using that input vs. output model.

The real job of an accountant however, is not merely entering a transaction in the records but rather of knowing how to classify transactions. For example, which engineering items are repairs and which ones should be treated as new fixed assets instead? Is the value of the motor car as shown in the accounts still valid or does it need to be marked down – or even up? The accountant is also responsible for summarising the transactions in the way that most suits the people who need the information and presenting it in a way that makes sense. Seen in this light, it is not possible to create “accounting” software as these accounting judgement roles cannot be played by a computer program. What we refer to as accounting software should really be referred to as bookkeeping software.

Auditing, on the other hand, is the checking process. Confirming that data going in at one end of the system comes out the way it should at the other end, is just one audit objective and frankly, it isn’t even the most important one. The most important objectives of audit are to determine whether the financial statements (a) contain all the information they should contain, (b) contain only the information they should contain and (c) are reported in a way that conforms to a pre-agreed standard.

It does involve the arithmetical accuracy checking that most accountants do in the first place. However it also involves checking that the basis of classifying and summarising information was properly done – a test of judgement(because so-called accounting programs will execute incorrect instructionsto summarise or classify information just as faithfully as they will correct ones.)It also involves checking that there is no information missing  - another judgement test.It also involves checking that the information is not overstated – also a matter of judgement. That’s not all however. International Standards on Auditing now actually pay attention to the process that was used to evaluate the accountant and it requires certain mandatory steps to be taken and documented, no matter how certain the auditor may be of the correct situation.

This leads to an interesting question then; is it possible to create software that can meet all of these requirements of the audit? Data interrogation and sample selection software could go through the accounting information and try to extract information that makes sense but could it tell if the classification method used by the accountant was wrong? How would it decide if the evidence provided was acceptable? This is a trickier proposition and indeed, nobody has yet been able to design software that actually “audits”, much in the same way that nobody has been able to design software that does “accounting.”

What does this mean for a practitioner thinking about buying audit software? Audit software doesn’t have transactions that you can insert at one end and click to see if they have been properly classified at the other end. Instead it provides what amounts to very a long and sophisticated checklist (or series of checklists) of the all the procedures an auditor needs to carry out to determine the three objectives and comply with the mandatory procedures mentioned above. These are extensive and run, at present to nearly 800 separate mandatory procedures in the International Standards on Auditing. And that’s not counting the steps in the audit programmes in each section of the audit file. There is only one way to tell if this collection of checklistsworks properly; carry out an audit with it and submit the results of the audit to an independent quality reviewer to determine if the work was done properly.

People who aren’t skilled enough to know how to use the checklist will not be able to gauge whether they failed or passed the quality review due to an inadequacy of their checklist or due to their failure to use it properly.

Also, although the ISAs prescribe the approach to the audit to which all auditors should conform and in some instances even stipulate the exact tests to be carried out, they are not precise enough about how to do it. For example, there are more than a dozen ways to develop a sampling frame that produces a truly random sample. Which one is most appropriate? What’s a reasonable maximum or minimum sample size? If your sample contains an error, by how much should you extend your tests if at all? What’s the best way to calculate materiality? How many levels of review should there be in a particular assignment? The ISAs just don’t say.

Audit software helps by providing handy computation tools for sample design and selection and guidance on developing materiality. They even provide specific program steps for various areas of the audit. They also nudge you, (by blocking access to particular file areas and questionnaires), into using the work flow sequence that is most efficient or effective. These features, in the aggregate, comprise the methodology of particular audit software.

Without training by a person with proper experience on the specific methodology of a particular piece of audit software, it could be difficult to understand how all the questionnaires, computing tools and checklists work together to achieve efficient compliance with the ISAs.

For these reasons, taking a demo copy of audit software to try it out is unlikely to be helpful unless you are also willing to undergo not just “demo” training in the methodology but also a “demo” quality review – all lengthy and costly steps.

I would suggest that a more reassuring route would be to work through a presentation with an experienced user and ask to be shown all the features that you consider to be key in your existing methodology to ensure that they are present. Another, perhaps more important source of reassurance would be to look at the number of other practitioners relying on the same software to carry out their work successfully. The more there are, the more likely that it is the right product for you.

 Joe Gichuki

Joe, a member of ICPAU, is the CEO of Kawai Consulting, a firm that specialises in providing technical and capacity building services to financial auditors. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Today's Accountant Magazines